VICEARCADE FAN-MADE ARCADE

Field guide / Pulse puzzle

When to latch the ignition pulse

Play Ignition Pulse ↗

Read before latching

The ignition board alternates between two jobs. First read the named colour and choose the matching key. Only then can the pulse button catch the moving marker. A colour error costs two seconds and keeps the board on the matching step. A pulse error costs the same amount and keeps the matched colour in place. Look at the instruction above the four symbols after a mistake. It tells you which action is still needed, so you can recover without adding a second unnecessary press.

Watch the approach to centre

The white marker travels along a smooth wave. Near the ends of the meter it appears to hesitate, then it accelerates toward the middle. The teal band spans the centre. Pick a reference point a short distance outside that band and prepare the input when the marker passes it. Press as the marker enters the band. Trying to aim for the exact midpoint leaves less room for the time between seeing the position and physically pressing the button.

Change one setting at a time

Easy gives the widest target. Work through three clean stages there and watch how much of the meter the marker covers during a single sweep. Switching to street narrows the band and raises the sweep rate. Your old visual reference may now be too close to the centre. Choose an earlier point on the approach, then compare the number of misses. A repeated colour in consecutive stages is allowed. Do a quick read of the next label even when your finger is already on the key you expect.

Compare adjusted runs

Take the active time and add two seconds per incorrect input. The board converts that adjusted time into points by subtracting one hundred times the adjusted seconds, rounded to the nearest integer, from ten thousand. The score has a floor of one. Try an example in the calculator below. A run of twelve seconds with two misses receives the same adjusted time as a clean sixteen-second run. Saving a full error is usually a better target than shaving a fraction of a second from an otherwise unreliable colour choice.

Pulse timing score calculator

Enter the elapsed time before penalties and the number of misses across the three stages. Holding elapsed time fixed while adding one miss costs two hundred points until the score reaches its floor. Reducing misses usually offers a clearer first practice goal than trying to play every stage at maximum speed.

Controls for this drill

KeyboardActionTouch
1–4Match coral, aqua, gold or lilacNamed colour button
Space / EnterCatch the marker in the bandLatch pulse
RReset colour and timerRestart